1. Home | Products & solutions| Welding Equipment Home| Welding Equipment| Wire Feeders| RobustFeed Edge BX/CX/DX

RobustFeed Edge BX/CX/DX

ESAB_Robustfeed Edge_Front R3qtr_hi.jpg
ESAB_Robustfeed Edge_Open Panel_Right_hi_Rev.jpg
ESAB_Robustfeed Edge_Front R3qtr_hi.jpg
ESAB_Robustfeed Edge_Open Panel_Right_hi_Rev.jpg
  • Lightbox

RobustFeed Edge BX/CX/DX

RobustFeed Edge is an easy-to-use, high-performing, and connected multi-process MIG wire feeder for heavy industrial welding.

Precidrive

RobustFeed Edge BX/CX/DX

Where To Buy Request Information
Highlights
  • TrueFlow – digital gas flow control system from ESAB, effectively manages shielding gas, both in starts and while welding thus improving quality and decreasing consumption (CX and DX Only)
  • Hybrid HMI – material selection and configurations on a TFT screen inside the unit with a clear and easy to use external display for everyday operation makes unit intuitive to operate
  • PULSE WeldMode – adaptive pulse MIG process optimized to compensate for operator variation with an easy, user-friendly setup designed to achieve excellent weld results
  • SPEED WeldMode – provides a focused arc that allows the welder to control the weld puddle at higher travel speeds thus increasing the productivity, on steel, stainless steel, and aluminium.
  • THIN WeldMode – reduces spatter levels and helps reduce distortion when welding thin plates
  • CRAFT WeldMode – double pulse weld process designed to enhance aluminium and stainless-steel, producing TIG like bead appearance with the productivity of MIG welding
  • ROOT and ROOT Pipe WeldModes – easy to control gap bridging ability, optimized for root pass welding
  • Push Pull Compatible – RobustFeed EDGE DX is compatible and configured to be Aluminium ready, plug and play with the water-cooled Push Pull 350 torch.
  • Operator Management – quick to set-up system with RFID key card that allows locking down quick-jobs with limit setting that improves repeatability and adherence to welding procedure specifications
  • PreciDrive – wire drive system that maintains precision wire feeding performance to promote consistent weld quality
  • SpoolSafe – unique in the market, IP54 protection against dust, dirt, and other debris that keeps your wire dry and clean, improves feedability and reduces risk of contaminations of the weld
  • WeldCloud – integrated connectivity
  • Red Dot design award 2021 – winning design provides well-designed ergonomics and intuitive user interface that reduces operator training needs
Industries
  • Energy
  • Industrial and General Fabrication
  • Structural Steel Fabrication
  • Transportation
  • Railcars
  • Mobile Equipment
  • Tank and Vessel Fabrication
  • Pressure Vessels
  • Pipeline

Engineered for durability.

Rely on RobustFeed Edge to get the job done. Built for high productivity, its rugged design protects the integrity of your welding wire in every environment.

  • IP54-rated design with SpoolSafe™ wire protection to avoid contaminants in your weld

  • TrueFlow digital gas control ensures sufficient shielding gas protection

  • PRECIDRIVE wire feed system for better arc starts and stops

Engineered for productivity.

Enhance your workflow productivity with easy-to-use functionality.

  • Streamlined interface for welders of all skill levels

  • Easy-to-set welding parameters

  • Internal digital display for quick material selection and intuitive configuration of advanced parameters

  • Job memories on front panel for repeatability across operators and torch remote for quick operation


Engineered for insightful data.

Boost your productivity with instant data analysis and connect with WeldCloud™ technology – right out of the box.

  • WeldCloud Productivity – Analyze productivity, track consumption, and trace your welding processes.

  • WeldCloud Notes – Automate documentation and reporting to maintain compliance, manage weld procedures, and save time.

  • WeldCloud Fleet – Manage your entire fleet from any location with cloud-based job control, service logs, and performance insight.

Engineered for precise gas control.

High-quality welds come easily with TrueFlow optimized gas flow. Reduce rework and increase cost savings by preventing unnecessary high gas consumption.

  • Optimization of gas flow during arc starts and welding

  • Automatic prevention of insufficient gas flow

  • Saves USD 600-1200 per year in typical use cases

Specifications

Ordering

Description
Product number
Description: RobustFeed Edge BX, Water-cooled, Euro
Product number: 0446600880
Description: RobustFeed Edge CX, Water-cooled, Digital Gas Control, Heater, Euro
Product number: 0446600881
Description: RobustFeed Edge DX, Water-cooled, Digital Gas Control, Heater, Rear OKC, Euro, Push-Pull Capable
Product number: 0446600882

Accessories & Parts

Description
Product number
Description: RobustFeed Wheel Kit *
Product number: 0446081880
Description: Torch Strain Relief RobustFeed
Product number: 0446082880
Description: 4-wheel Trolley, Power Source
Product number: 0349313450
Description: Guide Pin Extension Kit *
Product number: 0465508880
Description: Quick Connector Marathon Pac™
Product number: F102440880
Description: Exeor MIG 4.0G2 CX, Gas-Cooled, Up/down **, 3m
Product number: 0700025755
Description: Exeor MIG 4.0G2 CX, Gas-Cooled, Up/down **, 4m
Product number: 0700025756
Description: Exeor MIG 4.0G2 CX, Gas-Cooled, Up/down **, 5m
Product number: 0700025757
Description: Exeor MIG 4.0W2 CX, Water-Cooled, Up/down**, 3m
Product number: 0700025730
Description: Exeor MIG 4.0W2 CX, Water-Cooled, Up/down**, 4m
Product number: 0700025731
Description: Exeor MIG 4.0W2 CX, Water-Cooled, Up/down, 5m
Product number: 0700025732
Description: 4-wheel Feeder Trolley for >300 mm Spools
Product number: 0349313700
Description: Boom Adaptor (Lifting Device)
Product number: 0446956880
Description: Torch Holder RobustFeed
Product number: 0446958880
Description: Exeor MIG 4.0G2 DX, Gas-Cooled, Graphic Display***, 5m
Product number: 0700025760
Description: Exeor MIG 4.0W², Water-Cooled, 4m
Product number: 0700026051
Description: Exeor MIG 4.0W², Water-Cooled, 3m
Product number: 0700026050
Description: Exeor MIG 4.0W2 DX, Water-Cooled, Graphical display, 4m
Product number: 0700025734
Description: Exeor MIG 4.0W2 DX, Water-Cooled, Graphical display, 3m
Product number: 0700025733
Description: Exeor MIG 4.0G2 DX, Gas-Cooled, Graphic Display***, 4m
Product number: 0700025759
Description: Exeor MIG 4.0W2 DX, Water-Cooled, Graphical display, 5m
Product number: 0700025735
Description: Exeor MIG 4.0W², Water-Cooled, 5m
Product number: 0700026052
Description: Exeor MIG 4.0G2 DX, Gas-Cooled, Graphic Display***, 3m
Product number: 0700025758
Description: Counterbalance Arm RobustFeed **
Product number: 0448181880
Description: Feeder Mounting Kit, Power Source Assembly incl cable holders
Product number: 0447518880
Description: Coolant Liquid, 10 l
Product number: 0465720002
Description: Counterbalance Arm Extension Kit for use with 6m (19 ft) and 7.5m (24 ft) torches
Product number: 0448116880
Description: Wheel Kit, Power Source
Product number: 0465416880
Description: Stabilizer Kit for Counterbalance Arm **
Product number: 0460946880
Description: COOL 2 Cooling Unit
Product number: 0465427880
Description: PP 350w, Inline push-pull, EURO, 8 m
Product number: 0700026191
Description: PP 350w, Inline push-pull, EURO, 12 m
Product number: 0700026192

Documents

Additional Documents

otherdocuments_icon

Need Product Help?

Product information and support line:

+380 44 568 53 68 +380 44 583 55 67

Caret Down