FILARC 76S

CTOD tested, all-position basic AC/DC electrode for offshore fabrication. Alloyed with max 1% nickel. Good CVN toughness down to -60° C. CTOD tested in the AW and SR conditions. Use short arc. Weave slowly when permitted. DC+. Use DC- for root pass.

FILARC 76S

Specifications

Specifications
Classifications	SFA/AWS A5.5 : E7018-G H4R EN ISO 2560-A : E 46 6 Mn1Ni B 32 H5
Approvals	ABS : 3Y H5 ABS : 5YQ420 H5 BV : 5Y42 H5 CE : EN 13479 DNV : 5 Y42 H5 LR : 5Y46 H5 UKCA : EN 13479

Approvals are based on factory location. Please contact ESAB for more information.

Welding Current	AC, DC+-
Diffusible Hydrogen	< 4.0 ml/100g
Alloy Type	Low alloyed (0.9 % Ni)
Coating Type	Basic covering
Min AC OCV	65 V

Typical Tensile Properties
Condition	Yield Strength	Tensile Strength	Elongation
ISO
As Welded	560 MPa	630 MPa	25 %

Typical Charpy V-Notch Properties
Condition	Testing Temperature	Impact Value
ISO
As Welded	-40 °C	130 J
As Welded	-60 °C	80 J

Typical Weld Metal Analysis %
C	Mn	Si	S	P	Ni	Cr	Mo	V	Al	Cu	Nb	Ti
0.065	1.65	0.30	0.005	0.015	0.90	0.035	0.01	0.01	0.005	0.03	0.005	0.01

Deposition Data
Diameter	Current	Voltage	Efficiency (%)	Fusion time per electrode at 90% I max	Deposition Rate
2.5 x 350 mm	65-100 A	26 V	62 %	52 sec	0.96 kg/h
3.2 x 350 mm	90-150 A	23 V	39 %	67 sec	1.3 kg/h
4.0 x 350 mm	110-190 A	23 V	39 %	74 sec	1.71 kg/h
4.0 x 450 mm	110-190 A	23 V	40 %	95 sec	1.59 kg/h
5.0 x 450 mm	185-235 A	25 V	39 %	110 sec	2.35 kg/h