Search Dealer Locator Log in

OXWELD 1515 Series

Where To Buy

Inquire about this product

Natural gas or propane one-piece. Long preheat flames.

Highlights

Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
Long, parallel preheat passages – permit re-dressing nozzle without affecting performance
One-piece nozzle is a single piece of solid copper – provides maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe
Two-piece nozzles – recommended for high efficiency with fuel gases other than acetylene – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost
Conical seats – instant aligning provides tight seal, prevents leaks around nozzle nut

Industries

Industrial and General Fabrication
Repair and Maintenance
Structural Steel Fabrication
Light Fabrication

Specifications

Gas Tips

Preheat Holes
08Z85
08Z86
08Z87
08Z88
08Z89
65Z12
65Z13
65Z14

Gas Tips Operation Data

Model	Tip Size	Metal Thickness	Cutting Speed	Average Kerf Width	Total Acetylene Consumption	Gas Pressure - Cutting Oxygen	Gas Pressure - Preheat Oxygen	Gas Pressure - Propane/NatGas	Total Oxygen Consumption
08Z85	1/2 in.	1/4 in.	18-24 in./min	.050 in.	5-8 cfh	20-25 psig	20-50 psig	3-5 psig	55-60 cfh
08Z85	1/2 in.	1/2 in.	18-24 in./min	.065 in.	5-8 cfh	20-25 psig	20-50 psig	3-5 psig	55-60 cfh
08Z85	1/2 in.	1/4 in.	18-24 in./min	.050 in.	5-8 cfh	30-35 psig	20-50 psig	3-5 psig	70-80 cfh
08Z85	1/2 in.	1/2 in.	18-24 in./min	.065 in.	5-8 cfh	30-35 psig	20-50 psig	3-5 psig	70-80 cfh
08Z86	1-1/2 in.	3/4 in.	12-20 in./min	.080 in.	8-12 cfh	30-35 psig	20-50 psig	3-5 psig	135-155 cfh
08Z86	1-1/2 in.	1 in.	11-17 in./min	.090 in.	8-12 cfh	30-35 psig	20-50 psig	3-5 psig	135-155 cfh
08Z86	1-1/2 in.	1-1/2 in.	10-15 in./min	.095 in.	8-12 cfh	30-35 psig	20-50 psig	3-5 psig	135-155 cfh
08Z86	1-1/2 in.	3/4 in.	12-20 in./min	.080 in.	8-12 cfh	35-40 psig	20-50 psig	3-5 psig	150-165 cfh
08Z86	1-1/2 in.	1 in.	11-17 in./min	.090 in.	8-12 cfh	35-40 psig	20-50 psig	3-5 psig	150-165 cfh
08Z86	1-1/2 in.	1-1/2 in.	10-15 in./min	.095 in.	8-12 cfh	35-40 psig	20-50 psig	3-5 psig	150-165 cfh
08Z86	1-1/2 in.	3/4 in.	12-20 in./min	.080 in.	8-12 cfh	40-45 psig	20-50 psig	3-5 psig	160-210 cfh
08Z86	1-1/2 in.	1 in.	11-17 in./min	.090 in.	8-12 cfh	40-45 psig	20-50 psig	3-5 psig	160-210 cfh
08Z86	1-1/2 in.	1-1/2 in.	10-15 in./min	.095 in.	8-12 cfh	40-45 psig	20-50 psig	3-5 psig	160-210 cfh
08Z87	4 in.	2 in.	9-13 in./min	.100 in.	8-12 cfh	25-30 psig	25-55 psig	3-5 psig	215-245 cfh
08Z87	4 in.	3 in.	7-10 in./min	.105 in.	8-12 cfh	25-30 psig	25-55 psig	3-5 psig	215-245 cfh
08Z87	4 in.	4 in.	6-9 in./min	.115 in.	8-12 cfh	25-30 psig	25-55 psig	3-5 psig	215-245 cfh
08Z87	4 in.	2 in.	9-13 in./min	.100 in.	12-18 cfh	30-35 psig	25-55 psig	5-10 psig	235-290 cfh
08Z87	4 in.	3 in.	7-10 in./min	.105 in.	12-18 cfh	30-35 psig	25-55 psig	5-10 psig	235-290 cfh
08Z87	4 in.	4 in.	6-9 in./min	.115 in.	12-18 cfh	30-35 psig	25-55 psig	5-10 psig	235-290 cfh
08Z87	4 in.	2 in.	9-13 in./min	.100 in.	12-18 cfh	35-40 psig	25-55 psig	5-10 psig	270-320 cfh
08Z87	4 in.	3 in.	7-10 in./min	.105 in.	12-18 cfh	35-40 psig	25-55 psig	5-10 psig	270-320 cfh
08Z87	4 in.	4 in.	6-9 in./min	.115 in.	12-18 cfh	35-40 psig	25-55 psig	5-10 psig	270-320 cfh
08Z88	8 in.	5 in.	5-7 in./min	.125 in.	12-18 cfh	25-35 psig	25-55 psig	5-10 psig	325-410 cfh
08Z88	8 in.	6 in.	4-6 in./min	.170 in.	12-18 cfh	25-35 psig	25-55 psig	5-10 psig	325-410 cfh
08Z88	8 in.	8 in.	3.5-4.5 in./min	.187 in.	12-18 cfh	25-35 psig	25-55 psig	5-10 psig	325-410 cfh
08Z88	8 in.	5 in.	5-7 in./min	.125 in.	12-18 cfh	35-45 psig	25-55 psig	5-10 psig	410-480 cfh
08Z88	8 in.	6 in.	4-6 in./min	.170 in.	12-18 cfh	35-45 psig	25-55 psig	5-10 psig	410-480 cfh
08Z88	8 in.	8 in.	3.5-4.5 in./min	.187 in.	12-18 cfh	35-45 psig	25-55 psig	5-10 psig	410-480 cfh
08Z88	8 in.	5 in.	5-7 in./min	.125 in.	18-20 cfh	55-65 psig	30-60 psig	5-10 psig	580-670 cfh
08Z88	8 in.	6 in.	4-6 in./min	.170 in.	18-20 cfh	55-65 psig	30-60 psig	5-10 psig	580-670 cfh
08Z88	8 in.	8 in.	3.5-4.5 in./min	.187 in.	18-20 cfh	55-65 psig	30-60 psig	5-10 psig	580-670 cfh
08Z89	12 in.	10 in.	2.5-3.5 in./min	.21 in.	20-23 cfh	40-50 psig	30-60 psig	10-15 psig	680-805 cfh
08Z89	12 in.	12 in.	2-3 in./min	.24 in.	20-23 cfh	40-50 psig	30-60 psig	10-15 psig	680-805 cfh
08Z89	12 in.	10 in.	2.5-3.5 in./min	.21 in.	22-28 cfh	55-65 psig	30-60 psig	10-15 psig	845-975 cfh
08Z89	12 in.	12 in.	2-3 in./min	.24 in.	22-28 cfh	55-65 psig	30-60 psig	10-15 psig	845-975 cfh
65Z12	16 in.	16 in.	2-3 in./min	.30 in.	35-40 cfh	60-70 psig	40-70 psig	20-25 psig	1,490-1,600 cfh
65Z13	18 in.	18 in.	1.5-2 in./min	.34 in.	40-45 cfh	50-60 psig	60-90 psig	22-26 psig	1,640-1,900 cfh

Documents

Additional Documents

Search Other Documents

Product Search

Arc Welding Equipment Accessories

Filler Metal Accessories

Gas Equipment Accessories

General Supplies

MIG Torch Consumables

Battery-Powered Welders

Engine Driven Welders

Multi-Process Welders

STICK Welders (SMAW)

TIG Welders (GTAW)

Weld Data Monitoring

Wire Feeders

Carbon Arc Gouging Electrodes

Exothermic Cutting

Controls

Cutting Machines

Gas Cutting Torches

Plasma Systems

Process Tools

Software

Aluminum

Cobalt

Hardfacing

Low Alloy

Mild Steel

Nickel

Other

Stainless Steel

Cutting Machines

H/VAC and Plumbing

Outfits

Regulators

Safety Accessories

Steel Industry Products

Torches

Wear Parts

Fume Mitigation

Head and Face

Cobots

Robotic Equipment

Weld Data Monitoring

Carbon Arc Gouging Torches

MIG Torches

Plasma Torches

TIG Torches

Mechanized Welding

Submerged Arc Welding

OXWELD 1515 Series

Specifications

Gas Tips

Gas Tips Operation Data

Documents

Additional Documents

Need Product Help?

Product information and support line: