1. Home | Products & solutions| Manual Plasma Cutting Home| Manual Plasma Cutting| ESAB Cutmaster 30

ESAB Cutmaster 30

Cutmaster 30 left view with shadow.JPG
CM30 Panel.png
Cutmaster 30 left view with shadow.JPG
CM30 Panel.png
  • Lightbox

ESAB Cutmaster 30

Hand-held, light and portable power source for plasma cutting with a 220-240V 50/60Hz single phase power supply.

Very simple to use and with a colour LCD panel and all adjustments in just one knob.

No need to adjust the gas the machine automatically detects the inlet and outlet pressure. An automatic system purges gas after cutting, increasing the useful life of the consumables.

Cutmaster 30
Recommended cutting capacity = 10 mm (254 mm/min)
Maximum cutting capacity = 16 mm (150 mm/min)

ESAB Cutmaster 30

Where To Buy Request Information
  • Light and portable, weighing only 13 kg (including torch)
  • Easy to use 4.3" colour LCD panel, with all adjustments in just one knob
  • Torch trigger 2T/4T function
  • Torch trigger lock for greater safety
  • Grate or plate cutting functions
  • Comes with torch included
  • Three-year guarantee for the power source and three months for the torch
  • Industrial and General Fabrication
  • Industrial Production & Manufacturing
  • Light Fabrication
  • Ship and Offshore Yards
  • Structural Steel Fabrication

Power + Portability.

  • Tackle cuts in any terrain with industrial housing and a compact design.
  • Recommended cutting capacity and maximum cutting capacity of 10 mm (254 mm/min) and 16 mm (150 mm/min)
  • 40% duty cycle at 30 A
  • Hand-held, light, and portable design
  • Durable, weather protected IP23S housing

Simplicity + Flexibility.

  • Complete any plasma cutting job with built-in functionality and flexibility.
  • Switch from normal plate to grate cutting mode to extend consumable life when working with expanded metal
  • Equipped with SL60™ 1Torch® and a full range of consumables for both shielded and unshielded cutting and gouging

Simplicity + Flexibility. 

  • Complete any plasma cutting job with built-in functionality and flexibility. 
  • Switch from normal plate to grate cutting mode to extend consumable life when working with expanded metal 
  • Equipped with SL60™ 1Torch® and a full range of consumables for both shielded and unshielded cutting and gouging 

Specifications

Ordering

Accessories & Parts

Documents

Need Product Help?

Product information and support line:

+65 6513 9188 1300 654 674 ( Southpac )

Caret Down