OXWELD 1502 Series

General Purpose. Medium Preheat, sufficient preheat for cutting dirty plate and for beveling.

OXWELD 1502 Series

Where To Buy Request Information

Highlights

Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle~One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf~Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames~Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle~One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf~Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames~Long, parallel preheat passages – permit re-dressing nozzle without affecting performance~One-piece nozzle is a single piece of solid copper – provides maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe~Two-piece nozzles – recommended for high efficiency with fuel gases other than acetylene – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost~Conical seats – instant aligning provides tight seal, prevents leaks around nozzle nut

Industries

Structural Steel Fabrication
Repair and Maintenance
Light Fabrication
Industrial and General Fabrication

Specifications

Tip Specifications

Metal Thickness	Tip Size	Preheat Holes	Cleaning Drill Size Cutting	Cleaning Drill Size Preheat
1/4 in.	1/4 in.	6	68	69
1/2 in.	1/2 in.	6	60	66
1-1/2 in.	1-1/2 in.	6	53	65
2-4 in.	4 in.	6	46	61
6-8 in.	8 in.	6	39	57
9-12 in.	12 in.	6	31	56
16-18 in.	18 in.	6	15	54
20 in.	20 in.	6	8	54

Operating Specifications

Part Number	Tip Size	Metal Thickness	Cutting Speed	Average Kerf Width	Total Acetylene Consumption	Gas Pressure - Acetylene	Gas Pressure - Cutting Oxygen	Gas Pressure - Preheat Oxygen	Total Oxygen Consumption
08Z67	1/4 in.	1/4 in.	17-25 in./min	.045 in.	6-8 cfh	5-7 psig	30-35 psig	20-25 psig	35-45 cfh
15Z17	1/2 in.	1/2 in.	15-23 in./min	.065 in.	8-10 cfh	5-7 psig	35-40 psig	20-25 psig	65-75 cfh
15Z18	1-1/2 in.	3/4 in.	13-21 in./min	.075 in.	14-16 cfh	5-7 psig	35-40 psig	20-25 psig	120-135 cfh
15Z19	1-1/2 in.	1 in.	12-18 in./min	.080 in.	14-16 cfh	5-7 psig	40-45 psig	20-25 psig	130-140 cfh
15Z19	1-1/2 in.	1-1/2 in.	11-16 in./min	.090 in.	14-16 cfh	5-7 psig	40-45 psig	20-25 psig	130-140 cfh
15Z19	4 in.	2 in.	10-14 in./min	.095 in.	14-16 cfh	5-7 psig	40-45 psig	20-25 psig	130-140 cfh
15Z19	4 in.	2-1/2 in.	9-12 in./min	.095 in.	14-16 cfh	5-7 psig	40-45 psig	20-25 psig	130-140 cfh
15Z19	4 in.	3 in.	8-11 in./min	.100 in.	14-16 cfh	5-7 psig	40-45 psig	20-25 psig	130-140 cfh
15Z19	4 in.	4 in.	6-9 in./min	.015 in.	14-16 cfh	5-7 psig	40-45 psig	20-25 psig	130-140 cfh
15Z19	1-1/2 in.	1 in.	12-18 in./min	.080 in.	16-20 cfh	5-7 psig	40-45 psig	20-25 psig	150-170 cfh
15Z19	1-1/2 in.	1-1/2 in.	11-16 in./min	.090 in.	16-20 cfh	5-7 psig	40-45 psig	20-25 psig	150-170 cfh
15Z19	4 in.	2 in.	10-14 in./min	.095 in.	16-20 cfh	5-7 psig	40-45 psig	20-25 psig	150-170 cfh
15Z19	4 in.	2-1/2 in.	9-12 in./min	.095 in.	16-20 cfh	5-7 psig	40-45 psig	20-25 psig	150-170 cfh
15Z19	4 in.	3 in.	8-11 in./min	.100 in.	16-20 cfh	5-7 psig	40-45 psig	20-25 psig	150-170 cfh
15Z19	4 in.	4 in.	6-9 in./min	.015 in.	16-20 cfh	5-7 psig	40-45 psig	20-25 psig	150-170 cfh
15Z19	1-1/2 in.	1 in.	12-18 in./min	.080 in.	16-20 cfh	6-8 psig	40-45 psig	20-25 psig	185-210 cfh
15Z19	1-1/2 in.	1-1/2 in.	11-16 in./min	.090 in.	16-20 cfh	6-8 psig	40-45 psig	20-25 psig	185-210 cfh
15Z19	4 in.	2 in.	10-14 in./min	.095 in.	16-20 cfh	6-8 psig	40-45 psig	20-25 psig	185-210 cfh
15Z19	4 in.	2-1/2 in.	9-12 in./min	.095 in.	16-20 cfh	6-8 psig	40-45 psig	20-25 psig	185-210 cfh
15Z19	4 in.	3 in.	8-11 in./min	.100 in.	16-20 cfh	6-8 psig	40-45 psig	20-25 psig	185-210 cfh
15Z19	4 in.	4 in.	6-9 in./min	.015 in.	16-20 cfh	6-8 psig	40-45 psig	20-25 psig	185-210 cfh
15Z19	1-1/2 in.	1 in.	12-18 in./min	.080 in.	16-20 cfh	6-8 psig	40-45 psig	20-30 psig	190-235 cfh
15Z19	1-1/2 in.	1-1/2 in.	11-16 in./min	.090 in.	16-20 cfh	6-8 psig	40-45 psig	20-30 psig	190-235 cfh
15Z19	4 in.	2 in.	10-14 in./min	.095 in.	16-20 cfh	6-8 psig	40-45 psig	20-30 psig	190-235 cfh
15Z19	4 in.	2-1/2 in.	9-12 in./min	.095 in.	16-20 cfh	6-8 psig	40-45 psig	20-30 psig	190-235 cfh
15Z19	4 in.	3 in.	8-11 in./min	.100 in.	16-20 cfh	6-8 psig	40-45 psig	20-30 psig	190-235 cfh
15Z19	4 in.	4 in.	6-9 in./min	.015 in.	16-20 cfh	6-8 psig	40-45 psig	20-30 psig	190-235 cfh
15Z19	1-1/2 in.	1 in.	12-18 in./min	.080 in.	16-20 cfh	6-8 psig	45-60 psig	20-30 psig	205-255 cfh
15Z19	1-1/2 in.	1-1/2 in.	11-16 in./min	.090 in.	16-20 cfh	6-8 psig	45-60 psig	20-30 psig	205-255 cfh
15Z19	4 in.	2 in.	10-14 in./min	.095 in.	16-20 cfh	6-8 psig	45-60 psig	20-30 psig	205-255 cfh
15Z19	4 in.	2-1/2 in.	9-12 in./min	.095 in.	16-20 cfh	6-8 psig	45-60 psig	20-30 psig	205-255 cfh
15Z19	4 in.	3 in.	8-11 in./min	.100 in.	16-20 cfh	6-8 psig	45-60 psig	20-30 psig	205-255 cfh
15Z19	4 in.	4 in.	6-9 in./min	.015 in.	16-20 cfh	6-8 psig	45-60 psig	20-30 psig	205-255 cfh
15Z19	1-1/2 in.	1 in.	12-18 in./min	.080 in.	19-22 cfh	6-8 psig	50-55 psig	25-30 psig	235-285 cfh
15Z19	1-1/2 in.	1-1/2 in.	11-16 in./min	.090 in.	19-22 cfh	6-8 psig	50-55 psig	25-30 psig	235-285 cfh
15Z19	4 in.	2 in.	10-14 in./min	.095 in.	19-22 cfh	6-8 psig	50-55 psig	25-30 psig	235-285 cfh
15Z19	4 in.	2-1/2 in.	9-12 in./min	.095 in.	19-22 cfh	6-8 psig	50-55 psig	25-30 psig	235-285 cfh
15Z19	4 in.	3 in.	8-11 in./min	.100 in.	19-22 cfh	6-8 psig	50-55 psig	25-30 psig	235-285 cfh
15Z19	4 in.	4 in.	6-9 in./min	.015 in.	19-22 cfh	6-8 psig	50-55 psig	25-30 psig	235-285 cfh
15Z20	8 in.	6 in.	4.5-6.5 in./min	.157 in.	20-25 cfh	8-10 psig	35-45 psig	25-30 psig	395-460 cfh
15Z20	8 in.	8 in.	3.5-5.0 in./min	.170 in.	20-25 cfh	8-10 psig	35-45 psig	25-30 psig	395-460 cfh
15Z20	8 in.	6 in.	4.5-6.5 in./min	.157 in.	30-35 cfh	8-10 psig	55-65 psig	30-35 psig	545-625 cfh
15Z20	8 in.	8 in.	3.5-5.0 in./min	.170 in.	30-35 cfh	8-10 psig	55-65 psig	30-35 psig	545-625 cfh
15Z21	12 in.	10 in.	2.9-3.8 in./min	.190 in.	40-45 cfh	8-10 psig	65-75 psig	30-35 psig	630-710 cfh
15Z21	12 in.	12 in.	2.4-3.0 in./min	.210 in.	40-45 cfh	8-10 psig	65-75 psig	30-35 psig	630-710 cfh
15Z21	12 in.	10 in.	2.9-3.8 in./min	.190 in.	45-55 cfh	10-12 psig	55-65 psig	30-35 psig	790-905 cfh
15Z21	12 in.	12 in.	2.4-3.0 in./min	.210 in.	45-55 cfh	10-12 psig	55-65 psig	30-35 psig	790-905 cfh

Ordering

Description

Product number

Product number: 15Z18

Product number: 15Z17

Product number: 08Z67

Product number: 15Z19

Product number: 15Z20

Product number: 15Z21

Documents

Additional Documents

Search Other Documents

Need Product Help?

Product information and support line:

(905) 670-0220

Product Search

Filler Metal Accessories

Gas Equipment Accessories

General Supplies

MIG Torch Consumables

Plasma Accessories

Welding Equipment Accessories

Automatic Gouging / Travel Systems

Carbon Arc Gouging Electrodes

Carbon Arc Gouging Torches

Exothermic Cutting

Controls

Cutting Machines

Gas Cutting Torches

Plasma Systems

Process Tools

Software

Aluminum

Cobalt

Hardfacing

Low Alloy

Mild Steel

Nickel

Other

Stainless Steel

Cutting Machines

H/VAC and Plumbing

Outfits

Regulators

Safety Accessories

Steel Industry Products

Torches

Wear Parts

Fume Mitigation

Head and Face

Cobots

Robotic Equipment

Software

Weld Data Monitoring

Carbon Arc Gouging Torches

MIG Guns

Plasma Torches

TIG Torches

Mechanized Welding

Orbital Welding

Submerged Arc Welding

Weld Data Monitoring

Battery-Powered Welders

Engine Driven Welders

MIG Welders (GMAW)

Multi-Process Welders

Software

STICK Welders (SMAW)

TIG Welders (GTAW)

Weld Data Monitoring

Wire Feeders

MIG Guns

TIG Torches

OXWELD 1502 Series

OXWELD 1502 Series

OXWELD 1502 Series

Specifications

Tip Specifications

Operating Specifications

Ordering

Documents

Additional Documents

Need Product Help?

Product information and support line: