CaB System 300S/300M

The new improvements:

• Pulse encoder controlled welding motion, as well as wire feed.
• Electrically designed to fit either welding with or without camera supervision.
• Joint tracking with camera supervision.
• Option for built in flux feed/gas feed control into remote control.
• Universal anti-tipping device to fit several types of rail.
• A larger selection of adapted welding heads.

The design

The CaB 300S is designed to handle the automated demands in the industrial environment. The column is eccentric, which means that the welding head is always lined up in the centre of the carriage. This to be able to weld round objects with turning rolls on the same rail. The CaB 300S can reach over high and long distances, both vertically and horizontally. The ±180° column rotation facility provides a total action radius. The CaB 300S can be prepared for or without camera supervision. This will decide the placement of the control box, PEK.

The 4x4 m size, 4m stroke both vertically and horizontally, is capable to carry 150 kg load at the end of the rack and pinion driven boom. Sufficient to carry a fully equipped head for high productive submerged-arc or gas metal arc welding.

Productivity...

The A2 or A6 welding systems with Process Controller PEK are easily combined with CaB 300S to control longitudinal or circumferential welding. A built-in swivel bracket at the end of the boom can position the welding head either for welding speed from the boom or from the mobile concrete carriage. Choose a rectifier or transformer of the power source family, LAF or TAF, and a complete welding station has quickly been assembled - a very cost efficient and highly productive piece of equipment.

...and safety

The low control voltage makes it possible to weld in damp and confined areas. An Anti-fall guard which immediately locks the boom in the event of breakdown. Universal anti tilting device that fits for SJ50, A45, A55 and A65 rails are included to prevent collision accidents.