1. Home | Products & Solutions| Filler Metals Home| Filler Metals| Nickel| MIG Wires / TIG Rods (GMAW/GTAW)| Exaton NiCr-3

Exaton NiCr-3

Exaton NiCr-3

NiCr-3 welding wire is suitable for overlay welding when a deposit with chemistry corresponding to UNS N08825 is required. The weld deposit is a nickel-iron-chromium-molybdenum-copper alloy suitable for use in extremely corrosive environments. NiCr-3 has very good resistance to stress corrosion cracking (SCC) in chloride containing environments and is particularly suited for use in reducing environments such as those containing sulphuric and phosphoric acids. NiCr-3 is used for corrosion resistant alloy surfacing of components in the chemical, pollution control, oil & gas and petrochemical industries and often in connection with sour gas service. Typical components are tanks, heat exchangers, evaporators, transport pipes and scrubbers etc. It is used for TIG welding.

Where To Buy Inquire about this product

For SAW Stainless Steel Welding in Heavy Duty Environments

Developed from a legacy of over 80 years in specialty alloy filler metals, Exaton (formerly Sandvik Welding Operations) is the leading brand in high-quality, corrosion-resistant filler metals. Products are made for welding stainless steel and nickel alloys in the most demanding environments. 

Unbeatable Quality in SAW Wire

Wire quality is consistent from batch to batch in terms of chemistry, mechanical properties and dimensional tolerances. Get consistent welds with no need to trim the parameters.

Innovative Corrosion-Resistant Chemistry

Exaton's innovative chemistry provides high corrosion resistance with increased content of chemical elements such as Cr and Mo. It also delivers productivity improvements, such as permissible finished chemistry with a single layer weld overlay in applications that traditionally required two or even three layers.

SAW Flux with Less Moisture & Damage

Steel drum packaging delivers high moisture resistance and less damage during shipping and handling. This better protects the flux inside. Available in 20-25 kg drums.

SAW Flux that Helps You Save

Electroslag welding is similar to submerged arc strip cladding. The difference, however, is in the flux. ESW flux provides increased speed and fewer cladding layers (weld deposit), resulting in an overall lower cost of operation. Savings are in consumable costs and fewer man hours required.

Specifications

Ordering

Documents

Fact Sheets

factsheet_icon
Exaton NiCr-3

Additional Documents

otherdocuments_icon

Need Product Help?

Product information and support line:

1.800.ESAB.123

Caret Down