1. Home | Products & solutions| Gas Equipment Home| Gas Equipment| Wear Parts| PUROX 4216 Series

PUROX 4216 Series

4413_1121102496.jpg
4413_1121102496.jpg
  • Lightbox

PUROX 4216 Series

Heavy preheat for scrap cutting and beveling in excess of 45°. Can be used with FG-2 or MAPP.

PUROX 4216 Series

Where To Buy Request Information
Highlights
Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle~One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf~Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames~Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle~One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf~Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames~Long, parallel preheat passages – permit re-dressing nozzle without affecting performance~One-piece nozzle is a single piece of solid copper – provides maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe~Two-piece nozzles – recommended for high efficiency with fuel gases other than acetylene – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost~Conical seats – instant aligning provides tight seal, prevents leaks around nozzle nut
Industries
  • Structural Steel Fabrication
  • Repair and Maintenance
  • Light Fabrication
  • Industrial and General Fabrication

Specifications

Ordering

Description
Product number
Description: 4216 Series Propylene Tip, 1/2 metal thickness
Product number: 998590
Description: 4216 Series Propylene Tip, 1/8-1/4 metal thickness
Product number: 998589
Description: 4216 Series Propylene Tip, 2-4 metal thickness
Product number: 998592
Description: 4216 Series Propylene Tip, 3/4-1 1/2 metal thickness
Product number: 998591
Description: 4216 Series Propylene Tip, 6-8 metal thickness
Product number: 998593

Documents

Additional Documents

otherdocuments_icon

Need Product Help?

Product information and support line:

1.800.ESAB.123

Caret Down